PC安装黑苹果 OSX10.8.2 U盘视频教程
本教程为麦创网 原创视频作品 ，未经同意禁止他人转载
本教程是为本站会员倾情打造的黑苹果安装视频教程
购买麦创网商城U盘可直接看本教程即可 有问题 请发帖留言{:soso_e100:}
麦创网商城 http://memacx.taobao.com
购买 链接 猛烈点击 猛烈点击
2M的小水管 上传了三个小时{:soso_e141:}才完成 转载请出名出处 谢谢！
主机配置： CPU: Intel(R) Pentium(R) Dual CPU E8300 主板： 技嘉GA-P43-ES3G 内存： 4G DDR800 硬盘： 三星64G SSD+2T 显卡: 影驰9500GT 准将版128bit /TC512M 实际是128M 声卡： 集成ALC888 声卡＋创新SB0060 网卡： 集成RTL8168/8111C
亲先设置 BIOS
- BIOS settings:
- Set your BIOS to its default settings.
- Execute Disable bit: Enabled
- XD (if exists): Enabled
- Limit CPUID Max: Disabled
- Set all cores of the CPU active/enabled.
- Virtualization (if exists): Enabled or Disabled, try it.
- Hyper-threading: Enabled or Disabled, try it.
- HPET (High Precision Event Timer/PCH): Enabled
- SATA Mode: AHCI
- Set all the Overclock/Performance/Turbo etc. values to Auto.
- Set the UEFI mode settings (if exists) to compatible mode
进不到安装界面 亲可以输入一下红色参数 试试
-.
"-v cpus=1".
"GraphicsEnabler=Yes" This is needed for Intel HD 4000 installation."cpus=1" This may be needed for some 2011 socket motherboards and some laptop computers. TSC Sync should be selected for those 2011 socket motherboards during install. Kernel Patcher should be selected for those problematic laptop computers.
"UseKernelCache=No" This command is needed for computers that freeze at any point (including PCI Configuration Begin" line) or computers that act weird this can be a CMOS reset or ignoring other SATA ports issue.By entering this command, ElliottRTC.kext and modified IOPCIFamily.kext will be loaded during install.
"-v" Verbose mode.
"-x" Safe mode.
"USBBusFix=Yes" This option is to fix USB related issues of some motherboards that can cause freeze or USB ports to fail.
"npci=0x3000" Computers that freeze on "[ PCI Configuration Begin ]" line may try this command.
"ATIConfig=xx" "xx" is the ATI framebuffer name for target model (search it on google). This may be needed for some Intel HD 4000 + ATI gpu computers to boot with "GraphicsEnabler=Yes" command.If you used this command to boot iATKOS ML2 media, then you will also need to use it to boot your ML2 system.
猛烈点击 购买U盘 点我
安装接图
| 
发表于 13/3/8 20:35:43
{:1_1:}{:1_1:}