ACer3830TG安装后还差关机(睡眠)和USB3.0没解决
本帖最后由 yflwz 于 18/12/6 16:47 编辑
https://www.tonymacx86.com/threa ... with-clover.148093/
https://www.tonymacx86.com/threa ... for-laptops.175801/
https://www.tonymacx86.com/threa ... -dsdt-ssdts.152573/
查了这几篇帖子，针对dsdt和ssdt都做了修复，使其编译的时候没有错误。目前安装macOS High Sierra 10.13.6 ,设备HD3000、CX20588音频、AR8151网卡、AR946X的WIFI、USB2.0、摄像头、CPU变频、屏幕亮度控制等都正常，只差USB3.0和不能关机、睡眠。其中USB3.0可以接设备使用，但系统信息中没体现出来，但接上任何USB设备之后，明显会影响到其他USB的设备，体现为USB无线鼠标卡顿，反应不灵活；另外一个问题是不能关机和睡眠，主要是关机的时候电源不断电（重启），睡眠很少用，所以可以不管。
附上几个Clover的配置文件，都是根据RehabMan-HD3000config.plist原文件修改，修改的依据来源于
https://www.tonymacx86.com/threa ... with-clover.148093/
Note regarding CPU power management and SSDTs
If you're getting a panic in AppleIntelCPUPowerManagement and/or SMC_ACPI_PlatformPlugin it may be related to your OEM CPU power management related SSDTs.
Some systems may need to drop some of the OEM SSDTs. This happens most frequently with Sandy Bridge systems (but not all). There are two configurations for DropTables in the provided config.plist files. The default is minimal. The alternate is named #DropTables and is a bit more aggressive. Each configuration resides in config.plist/ACPI. You can use the alternate by renaming DropTables->##DropTables and renaming #DropTables->DropTables (in that order). Depending on how the OEM labels the tables, this may or may not work. If you still have issues, set config.plist/ACPI/SSDT/DropOem=true. You will need to set config.plist/ACPI/SSDT/Generate=true (or the individual CStates/PStates=true) to use DropOem=true or the alternate DropTables.
因为我自己提取并修复过的SSDT.aml到SSDT-X.aml，一但放入/EFI/CLOVER/kexts/Other目录，这时候电脑是进不去系统，无限重启的。但是只要删除所有的SSDT文件，可以正常进入系统并全上面所说的功能正常,除了关不了机和USB3.0不正常之外。差点忘记，我用的clover版本是4778。
笔记本Acer3830TG
CPU:I7-2630QM
内存：4*2=8G(Kingston)
声卡：CX20588
有线网卡：AR8151
WIFI:AR946X
晚点再把dsdt文件也一起上传，请大家帮忙想办法解决一下，谢谢！
https://www.tonymacx86.com/threa ... with-clover.148093/
https://www.tonymacx86.com/threa ... for-laptops.175801/
https://www.tonymacx86.com/threa ... -dsdt-ssdts.152573/
查了这几篇帖子，针对dsdt和ssdt都做了修复，使其编译的时候没有错误。目前安装macOS High Sierra 10.13.6 ,设备HD3000、CX20588音频、AR8151网卡、AR946X的WIFI、USB2.0、摄像头、CPU变频、屏幕亮度控制等都正常，只差USB3.0和不能关机、睡眠。其中USB3.0可以接设备使用，但系统信息中没体现出来，但接上任何USB设备之后，明显会影响到其他USB的设备，体现为USB无线鼠标卡顿，反应不灵活；另外一个问题是不能关机和睡眠，主要是关机的时候电源不断电（重启），睡眠很少用，所以可以不管。
附上几个Clover的配置文件，都是根据RehabMan-HD3000config.plist原文件修改，修改的依据来源于
https://www.tonymacx86.com/threa ... with-clover.148093/
Note regarding CPU power management and SSDTs
If you're getting a panic in AppleIntelCPUPowerManagement and/or SMC_ACPI_PlatformPlugin it may be related to your OEM CPU power management related SSDTs.
Some systems may need to drop some of the OEM SSDTs. This happens most frequently with Sandy Bridge systems (but not all). There are two configurations for DropTables in the provided config.plist files. The default is minimal. The alternate is named #DropTables and is a bit more aggressive. Each configuration resides in config.plist/ACPI. You can use the alternate by renaming DropTables->##DropTables and renaming #DropTables->DropTables (in that order). Depending on how the OEM labels the tables, this may or may not work. If you still have issues, set config.plist/ACPI/SSDT/DropOem=true. You will need to set config.plist/ACPI/SSDT/Generate=true (or the individual CStates/PStates=true) to use DropOem=true or the alternate DropTables.
因为我自己提取并修复过的SSDT.aml到SSDT-X.aml，一但放入/EFI/CLOVER/kexts/Other目录，这时候电脑是进不去系统，无限重启的。但是只要删除所有的SSDT文件，可以正常进入系统并全上面所说的功能正常,除了关不了机和USB3.0不正常之外。差点忘记，我用的clover版本是4778。
笔记本Acer3830TG
CPU:I7-2630QM
内存：4*2=8G(Kingston)
声卡：CX20588
有线网卡：AR8151
WIFI:AR946X
晚点再把dsdt文件也一起上传，请大家帮忙想办法解决一下，谢谢！
自己解决。